Watch the video tutorials, or look things up in the written guide below.
Every step, tool and slider explained: your account, the photo, the brushes, paying and delivery. Pick a topic to jump to it.
SkinLab Resident.SkinLab Resident the single word login,
and enter the 6-digit code it sends. You do this once. The studio
also asks for it the first time you deliver.| Where | What is there |
|---|---|
| Far left | The rail: Studio, Library, and your 12 most recent skins. Click one to open it. |
| Left | The Source panel with From image, where a face is made from a photo. The ‹ folds it away. |
| Beside it | The brushes: a strip of tools, with the open tool's settings next to it, and Undo at the bottom of the strip. |
| Middle | The stage: the head with your skin. Its name is at the top left. |
| Right | Whole skin: tone, colour, detail and painted parts for the whole skin at once. |
| Under the head | Delivery: the free demo and the full version. |
| Top right | Your profile (sign in and out, link your avatar, transaction history) and your credit, when you have some. |
What a control does. The panels show the controls and their values. A small i next to a label explains it: hover it, or tap it on a touch screen. Every one of those explanations is also in this guide. A slider shows its value once you move it away from where it starts.
Language. The studio speaks English, French, German and Spanish. Pick yours in the menu at the top right (it is on the sign-in page too); the choice is remembered on this browser. Words the Second Life community uses in English everywhere — skin, mesh, bake, demo, vendor — and the brush names stay in English in every language.
Whole skin first, then spots. Get the light, colour and detail right for the whole skin on the right; then fix single places with the brushes on the left.
The skin is only as good as its photo. A good photo is:
No photo at hand? Use the webcam in step 1: fill the oval and face a window if you can. A ceiling light, with the screen glowing from below, leaves the eyes in shadow, and the skin keeps it. The studio warns you when the camera is low for a 2048 texture (under 800 px).
The From image tab takes you from a photo to a finished face in five steps. Your photo goes onto a painted base skin. The head gives the skin around your face, the ears and the neckshade; the photo gives your face. While you make a face the head stays in the front view, and the brushes and Whole skin are visible but do not react: they open when the face is saved. Start over, beside the text at the top of the panel, drops the photo and opens them again. Done steps show a tick; click the title of step 1, 2 or 3 to go back to it.
Choose Woman or Man, and Light skin or Dark skin. Then drop a photo on the box, click it to choose one, or press Use the webcam. The studio finds the face, picks a base head and its tone from the photo, places the photo and takes you straight to step 3. If the photo looks weak (too small, turned away), it tells you why in amber.
No photo of your own? Open the Face photos tab next to From image: choose Woman or Man and you see a few ready-made faces. Click one to see it larger, or See all faces for the whole set. Then Use this face: it goes on exactly like a photo you dropped, and you carry on from step 3.
Usually skipped: the studio has already chosen. Open it from step 3 with Change the head when the tone looks wrong. The line at the top says which tone was read from your photo. Pick another head tile or another tone in the Tone row; the base is baked again and your photo is put back on it.
The photo lies half see-through over the head. Line up the eyes; nothing else has to fit yet. Level eyes matter for step 4.
| Control | What it does |
|---|---|
| Size | Grows or shrinks the photo about its centre. The corner handles do the same. |
| Rotation | Turns the photo about its centre. Level eyes matter: Even the light and Mirror both work across the head's centre line. |
The head shows what Save will make. Everything here shows live on the head.
The whole face
| Control | What it does |
|---|---|
| Everything from the photo | On: Every part at full strength, in the photo’s own colour and light. This is how a face starts. Off: the base’s light and colour with the photo’s detail. Open a part below to set it on its own. |
| Even the light | For a photo lit from one side: the broad light becomes the same on both halves. Each side keeps its own detail — nothing is mirrored. The studio measures the photo, sets this for you and says which side was darker; pull it to off for the photo's own light. |
| Mirror one half | For a face half in shadow or turned away: copies the lighter half onto the darker one. (For a face half hidden or turned away: copies one half onto the other.) Turn it on, then pick Left → Right or Right → Left. |
| Mirror strength | A mirrored face loses what is uneven about it — a mole, a brow. Lower keeps some of the other side. To protect a spot, save first, then use the Mirror brush. |
| Skin tone | Photo’s tone: the base skin, ears and neck move toward your photo’s tone, as far as the painted tones go; your photo keeps its own colouring. Base tone: the base skin keeps its tone, and your face is recoloured to it, with your own features. |
| Base lightness | With Photo’s tone: The skin around your photo, ears and neck, a touch darker or lighter than the match measured from your cheek. |
The parts. One row each. The switch takes that part from the photo or leaves the base skin's own; a part you changed is marked adjusted.
| Part | What it takes |
|---|---|
| Skin detail | Freckles, pores and marks from the photo, in the base’s own colour and light. |
| Nose | The photo’s nose on the base. |
| Mouth | The photo’s lips, placed on the head’s lip area. |
| Brows | The photo’s brows. Turn off if hair covers them. |
| Lids | The lid, crease and under-eye. Low keeps the base’s crease and only tints it — in most photos the lids sit in shadow. |
| Eyes | The eye opening and lashes from the photo. |
Nudge (every part but Skin detail) puts a ring on the head to move that part on its own: drag the ring, use the wheel to scale, Shift+wheel for height only, the arrow keys for one pixel (Shift for five), + and − to scale, Esc to let go. While you hold the ring the photo itself shows, so you see where the part lands. The nose and mouth start fitted to the head, each eye is set into the head's eye opening, and the brows start where your photo has them.
The arrow on a row opens its sliders:
| Slider | What it does |
|---|---|
| Size | This part bigger or smaller on the head. The wheel over the Nudge ring does the same. |
| Height | Taller or flatter without changing the width — fuller or thinner lips, a longer or shorter nose. |
| Strength | How much of the photo; the part's own line above says what it takes. |
| Colour | Mine keeps the photo’s colour as it is — lips, blush, redness — and any cast from the light in it. The base keeps its own colour and takes only the photo’s detail. |
| Light | Mine keeps the photo’s shading as it is. The base re-lights this part with its own painted light — flat, no shadows. |
Always in reach at the bottom: Guides (the yellow lines), Hold to compare (the head without your photo, for as long as you hold it), Back, and Save my face.
Save my face takes under a minute. The studio lists each step over the head and ticks it off. A front photo cannot see inside the nostrils or between the lips, so those two small areas come from the base skin, blended into your face; teeth in the photo are covered the same way. Then the brushes and Whole skin open. Turn the head and look, from below too. Make another starts a new face.
| Do this | To |
|---|---|
| Drag | Turn the head (with Rotate, or with the right mouse button in any tool) |
| Wheel | Zoom |
| Wheel-click drag | Pan |
Light, at the top right of the stage:
| Mode | What it is |
|---|---|
| Flat | The texture carries the shading. Judge on this. What you see is the file. |
| Lit | A key light with cast shadows. For presentation only. Never judge colours here. |
| Shape | The head as clay, shaded from the mesh. Skin on / Skin off lays the skin over it, to see a painted crease against the real shape. |
Under the head: Front, ¾ L, ¾ R and Profile snap to those angles. Center puts the head back in the middle and keeps your angle and zoom. Ortho switches to a parallel view without perspective, useful for comparing the two sides. Wire draws the mesh edges over the skin. Ortho and Wire are remembered.
Two heads. For a woman's skin, the list at the top left of the stage lets you choose which head you look at. Skinlab head · female 1 is halfway to the EvoX head and is the one the studio opens on. Skinlab head · female 2 is the older head; the studio uses it while you make a face from a photo. The skin is the same; only the shape under it changes. Small things, the line of the lips most of all, sit a little differently on a different head, so female 1 is closer to what you will see in Second Life.
Reference. At the lower left is your photo. Click to enlarge it, click again to shrink.
While you work, a stamp runs around the neck of the preview, and the preview texture is made so that it does not fit a real head. Both are there so that a skin cannot be taken out of the browser. The delivered skin is clean.
The panel on the right. Everything here changes the whole skin — nothing needs aiming. For one spot, use the brushes on the left. A group or slider you changed gets a dot: click the dot to set it back.
Bake changes. Changes here show on the head at once, as a preview. A bar at the bottom of the panel lists what is waiting ("Previewing … — not saved yet"). Bake changes makes them part of the skin, in a few seconds (a tone about 20). Discard drops them all, and the × beside a part in the bar leaves just that part out. Previews are not in Undo: use Discard.
Tones switches the skin to another painted tone. This is not a colour filter: each tone is its own hand-painted skin. Click a tone: a quick estimate shows at once, and the exact result follows from the server in about 15 seconds (the banner at the top of the stage says which you are looking at). A dot on a tone means its exact preview is ready. Greyed tones are not painted for this face. On a saved face, a tone changes the skin around the face, the ears and the neckshade, and your face with it. Face, neckshade and ears always leave the studio as one set.
Colour sliders on the skin as it is now. After a tone bake, the baked skin is the new baseline. First choose where they act: Whole skin, Photo area (only where the photo shows), or Base skin (the skin around the photo: scalp, sides, neck, the ears and the neckshade). The i by Tone says which:
| Slider | What it does |
|---|---|
| Darker / lighter | A gamma curve, so highlights barely move and nothing blows out — the midtones do the travelling. |
| Contrast | Stretches the tones around mid-grey. The extremes roll off instead of clipping, so highlights keep their shape. |
| Saturation | The bake can read flatter than the photo. -100 is greyscale. |
| Olive / red | Pulls the whole skin toward olive or toward red. Lightness is untouched, so it tints without darkening. |
| Blue / golden | Cool toward blue or warm toward golden. Independent of the olive/red trim — moving one never drags the other. |
Texture, not colour — these stay yours whichever tone direction is chosen.
| Slider | What it does |
|---|---|
| Detail | Puts back pore texture the warp and projection softened. Only inside the photo — the canvas is already as crisp as you painted it. |
| Depth | Carves the head's own shadows back in — eye sockets, nose sides, under the lip. The shading comes from the mesh's real geometry, so a flat-lit photo gains dimension without inventing light. |
The Stylize filter is a brush now: see Stylize under Brushes.
Painted parts from the parts library, swapped in over the bake. Pick one to see it immediately; nothing is baked until you Bake.
| Slider | What it does |
|---|---|
| Transparency | How much of the photo's own part shows through. 0 covers it completely. |
| Up / down | Brows only: Moves the brow art. Live — bake when it sits right. |
| Closer / wider | Both brows toward or away from the nose bridge, together. |
| Tilt | Turns each brow around its own middle, mirrored. Up lifts the outer ends. |
Re-bakes as you drag, about 6s a look — nudge it and judge it.
| Slider | What it does |
|---|---|
| Brow height | Raises or lowers the brows. Nothing else moves. There is no Bake button: it bakes by itself after you let go, and Undo takes it back. |
Nostrils and Inner lip: Standard or Photo's own. Identical on every EvoX skin. The photo's own are distorted by the projection and carry cast shadow, so these are rebuilt from the canvas, tone-matched. Needs a bake to show. Inner lip replaces only the inside of the mouth, the strip between the lips; the lips themselves keep the photo's colour, lipstick included.
Makes the skin as it is now the new starting point. The history folds into it, so templates, tones and brushes from here on act on these pixels. Bake down this skin asks before it does it. Afterwards the templates, brow settings and stroke history can no longer be changed one by one, Undo starts fresh, and Photo strength and Make my face no longer apply to this skin; Project can still paint anything back.
The brushes fix one place at a time: you point at the problem. Pick a brush on the strip or press its key; the settings open beside the strip. Click the open brush again to go back to Rotate.
| Brush | Key | For |
|---|---|---|
| Rotate | V | Turning the head. No painting. |
| Paint | P | Blush, contour, eyeshadow, highlight, lowlight |
| Liquify | L | Pushing the skin, live |
| Mirror brush | 1 | A mark where the other side is clean |
| Mirror half | M | Covering a whole damaged side |
| Tone fix | 2 | Shadows, grey patches, blotches |
| Detail brush | 3 | Pore texture back in one place |
| Saturation brush | 4 | Colour out of, or into, one place |
| Heal brush | 5 | Skin from one place onto another |
| Borrow | 6 | Freckles or colour from a donor skin |
| Project | 7 | Painting any photo onto the skin |
| Stylize | 8 | The stylized look, and the original painted back where you want it |
| Photo strength | S | How much of the photo shows, and what to keep |
The fix brushes (Mirror brush, Tone fix, Detail, Saturation, Heal, Borrow, Project, Stylize) share three sliders:
| Slider | What it does |
|---|---|
| Size | The circle on screen, and it never changes size. Zoom in to work fine, zoom out to cover ground. |
| Edge | Soft fades out from the middle of the stroke, so the fix blends into the skin around it. Hard stops at the edge of the circle. Soft is what you want almost every time. |
| Opacity | How much of the fix lands. With a soft brush only the middle of the stroke reaches this much — it fades to nothing at the rim. |
Turn the head by dragging. It changes nothing on the skin.
Brush colour onto the skin. Nothing is committed until you press Bake.
| How it applies | What it does |
|---|---|
| Solid | Replaces the skin. Flat colour, nothing shows through — for filling something in. |
| Tone | Keeps the skin, shifts its colour. Every pore survives — blush, contour, a warm cheek. |
| Darken | Keeps the skin, takes it down. Goes truly dark and the grain still reads — moles, deep shadow. |
| Lighten | Keeps the skin, lifts it up. Highlights, brow bone, the bridge of the nose. |
| Control | What it does |
|---|---|
| Paint / Erase | Lay colour down, or rub painted colour back off. |
| Symmetry | Every stroke lands on both sides of the face. |
| Size | The circle on screen, and it never changes size. Zoom in to paint fine detail, zoom out to cover ground. |
| Edge | Soft fades out to nothing — that is what you want for toning. Hard gives a defined edge. |
| Opacity | How much one released stroke lays down. Paint over the same spot again to build up. |
The swatches: Highlight (lift a cheekbone, brow bone, nose bridge), Lowlight (deepen a hollow or a jawline), Blush rose, Peach, Bronze (contour), Taupe, Plum, Olive and Navy (eyeshadows), Berry (lips and deep colour).
Drag on the head to push the skin. Nothing is committed until you press Bake.
| Control | What it does |
|---|---|
| Symmetry | Every push lands mirrored on the other side of the face. Off to start with. |
| Size | The circle on screen, and it never changes size. Zoom in to work fine, zoom out to cover ground. |
| Push strength | How hard each drag pushes the skin. |
Paints the matching spot from the other side of the face, re-lit to fit. For a mark, a stray lash or an artefact where the other side is clean.
Paint over the problem; it is fixed when you lift the brush. The Mirror button on the strip holds both mirror tools: switch between Mirror brush and Mirror half at the top of its settings.
Cover an artefact on one side with the clean side, and protect what should stay.
| Control | What it does |
|---|---|
| Strength | 0 leaves the face untouched. Turn it up and the blue shows what will be overwritten. |
| Erase / Paint back | On the mask: protect a spot, or hand it back to the mirror. |
| Size | The circle on screen, and it never changes size. |
| Opacity | How much one released stroke erases or adds back. |
| Clear mask | Hides the blue so you can see the result. The mask is kept. |
Flattens the brightness and keeps every pore. For shadows, grey patches and blotches, not for anything with texture.
Pore texture back, only where you paint. Lashes and brows are not sharpened along the way.
| Control | What it does |
|---|---|
| Detail | Puts back pore texture — the Adjust panel's own Detail, same numbers, just under the brush. At zero a stroke has nothing to apply. |
Colour strength, only where you paint. Down drains a grey patch or a cast, up puts life back.
| Control | What it does |
|---|---|
| Saturation | Down takes the colour out of a patch — a grey band, a blotch, a cast. All the way down is grey. Up puts colour back. At "as shot" a stroke has nothing to apply. |
Hover the skin to take, press Space, then paint. The first stroke sets the distance and every stroke keeps it, like Photoshop’s healing brush.
Classic healing, for lashes and brows too.
Paints another skin into this one. Every skin sits on the same map, so freckles or a patch of skin land where they belong.
Lay a photo over the head, place it, then paint what you want from it onto the skin from this angle. Nothing is aligned for you.
| Control | What it does |
|---|---|
| Photo opacity | Only for lining the photo up. The stroke's own Opacity below decides how much lands. |
| Rotation | The top handle on the photo does the same. |
| Take | Detail: the photo's pores, hairs and marks on top of your own colour. Colour: the photo's colour and light, your own pores stay. Both: the photo whole, folds and shading included. |
| Match the skin’s tone | With Both: The photo keeps everything, folds and shading too, and its overall colour and light are moved to the skin under the stroke. Off: Both re-lights the photo by bands and its larger shading goes. |
A projection smears where the surface turns away from you: paint each side from its own angle. "The photo does not reach where you painted" means the photo is not over that spot: move it over the head.
Evens the skin and sharpens the brows, eyelids and lip line, with a fine pore texture. It can change brows, lips, stubble or a beard: paint those back with the brush, or click the lit level again to go back.
Choose a level, then paint the original back where you want it. Each stroke lands when you lift the brush — Ctrl+Z takes it back.
Pull the slider to blend the photo toward the base skin. Then paint the parts the slider must not touch: brows, moles, scars.
Step 1, blend to base. Pull the slider and the whole photo blends toward the base skin, live.
| Control | What it does |
|---|---|
| Photo transparency | The whole photo blends toward the base skin. Live on the head; press Bake when it looks right. |
Step 2, paint what to keep. Brows, moles, scars — anything the photo does better than the base. Painted areas ignore the slider and stay at full photo. Paint with Keep photo; Erase removes a painted decision and the slider rules there again.
| Control | What it does |
|---|---|
| Symmetry | Off by default: a mole is usually one-sided. Turn it on for brows, where the decision is the same on both sides. |
| Show painted areas | Gold where you have painted. Turn it off to judge the result clean. |
| Painted level | Normally leave these alone — a keep stroke is a keep stroke. What a stroke sets the photo to in that spot. 100% = keep the photo (the normal case). Lower mixes the base in locally; 0% is pure base. |
| Opacity | How far one released stroke moves the mask. Below 100% you can build up in passes. |
Then press Save & bake in the bar, or Discard. A transparency change alone is baked with Bake changes.
| Key | Action |
|---|---|
| V | Rotate |
| P L | Paint · Liquify |
| 1–7 | Mirror brush · Tone fix · Detail · Saturation · Heal · Borrow · Project |
| M S | Mirror half · Photo strength |
| Ctrl+Z | Undo |
| Alt (hold) | See the brush tip at true size. With a drag: size. With the wheel: edge. |
| Space | Paint and Tone fix: hold and click to take a colour. Heal: set the source under the brush. |
| X (hold) | Paint: erase for a moment |
| Right drag · wheel · wheel-click | Turn · zoom · pan, in every brush |
| Arrow keys | While nudging a part: move it one pixel. With Shift, five. |
| + − | While nudging a part: scale it |
| Esc | While nudging a part: let go of it |
SkinLab Resident
the word login, get a 6-digit code, enter it once. The
code proves you own the avatar. That is the whole handshake.reset, enter your account's email, the code
and your new password within ten minutes. You do it yourself.
Nobody at Skinlab ever sees your password.DELETE to confirm. The account, its skins and its photos
are deleted for good; delivered skins stay in Second Life.SkinLab Resident and we deliver the right skin or pay
you back.| Product | What arrives |
|---|---|
| Demo · free | 2048 px, the same set as the full version: face and neckshade, ears. The face is marked DEMO on both cheeks and the forehead; everything else is there to judge. |
| Full version | 2048 px: face and neckshade as one tattoo layer (BOM), ears as a universal layer. No watermark. |
SkinLab Resident, usually within
a minute or two. Once you accept it, the folder is at the top of
your inventory and in the Recent tab.SkinLab Resident with your store's name.